Vol 5 No 1 (2021)

Lihat Vol 5 No 1 (2021)

DOI: https://doi.org/10.12962//j225800914.v5i1

Diterbitkan: 2024-11-13

Articles

Local Stress Analysis in the Chain Link of Mooring Line That Had Diameter Degradation

Eko Budi Djatmiko, Murdjito Murdjito, Rafliansyah Azhar Putera

1-9
- PDF (English)
Analysis of the Effect of Abrasive Material and Polyurethane Coating Thickness Variations on ASTM A36 Steel Towards Corrosion Rate in Sea Water Environment

Herman Pratikno, Wimala Lalitya Dhanista, Felita Widya Hapsari

10-17
- PDF (English)
Influence Analysis of Shielding Gas Flow Rate and Purity Level Variation on GMAW Welding Process to Microstructure of Alumunium 5083

Nur Syahroni, Yeyes Mulyadi, Sadewa Sechan Winando

18-22
- PDF (English)
Experimental & Numerical Studies of Vertical Motion Acceleration Analysis in Helideck on a Catamaran Floating Crane

Eko Budi Djatmiko, Murdjito Murdjito, Yunan Setiawan Suwandono, Abdul Ghofur

23-28
- PDF (English)
The Effect Analysis of Coating Thickness Variation and Mixture Composition of Magnesium – Flake Glass on Epoxy Coating on Abrasive Resistance, Adhesion Strength, and Prediction of Corrosion Rate of ASTM A36 Steel Plate

Herman Pratikno, Hasan Ikhwani, Yudiardana Tridantoko Susarno

29-35
- PDF (English)
Experimental Study and Numerical Analysis of Floating Crane Catamaran Mooring Tension in Intact and Damage Conditions Using Time-Domain Approach

Eko Budi Djatmiko, Murdjito Murdjito, Mochamad Hanif Rafi’i, Erdina Arianti

36-43
- PDF (English)